How do I add a site location?

Go to Site Locations, click New Site Location, choose the project, name the site location, place it on the map and click Create.

Before you start

The project must already exist. A site location (sometimes called a Gate) can only be added after its project exists.
Every project already has one site location from when it was created. Add more only if the site has another entry point or work area.
Know the address, or be ready to find the spot on a map.

In the left menu, under Field Operations, click Locations, then Site Locations.
Click New Site Location in the top-right corner.
In Project, pick the project this site location belongs to.
In Site Location, type a name workers will recognise, such as Main Gate or Loading Dock (2 to 50 characters).
Place the pin: search the address in the box at the top-left of the map, click the map, or drag the pin.
Check Location and Time Zone. Both are filled in from the map, and you can change them.
Set the Radius (300 to 1000 metres).
Click Create. You'll see Site location added successfully.

If you choose a project in the Project: filter first, the new page opens with that project already selected.
Use Satellite view (bottom-left of the map) to find the exact entrance on a large site.
To size the check-in zone, see How do I set a site boundary?

Project is required: choose a project in the Project box.
Create is greyed out: set the location by searching, clicking the map or dragging the pin.
No details found for this location: try a different address, or click the spot on the map instead.