How do I set a site boundary?
A site's boundary is its check-in zone: a circle around the site location's pin. You set its size with the Radius setting when you add or edit a site location.
What the boundary is
- The radius is how far the check-in zone stretches out from the pin, in metres.
- It's shown as a red circle on the map, which grows or shrinks as you change it.
- The smallest radius is 300 metres and the largest is 1000 metres. It starts at 300.
Steps
- Open the site location you want to change. See How do I edit a site location? For a new one, see How do I add a site location?
- Make sure the pin is in the right place on the map.
- Drag the Radius slider, or type a number in the small box beside it.
- Check the red circle covers the area you want.
- Click Update (or Create for a new site location).
Good to know
- When you create a project, the same setting is called Location Radius.
- Start with the smallest radius that covers the whole entry area. A small zone keeps check-ins accurate. Make it bigger only if workers have trouble checking in.